Knife Database
   
⇔ Manufacturer ⇔ Model ⇔ Blade Length ⇔ Thickness ⇔ Steel ⇔ Hardness ⇔ Recommended Angle ⇔ Recommended Finish ⇔ Depth ⇔ Alignment⇔ Intent
Zero Tolerance 0560/0561 3.75 in 0.157 Elmax 60 left 25/right 26 3.5 micro leather bottom B.5 EDC
 
Authors Comments:Not the sharpest thing in the world but will keep that edge for quite some time.
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: JosephMurray
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Tojiro ITK 120 mm petty 4.72 . White #2 60 15 Chosera 10K Bottom B 0.5 .
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: mark76
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 525 Presidio M4 LE (525BK-1101) 3 0.12 CPM M4 59-61 15 0.5 strops Top A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
15 deg; A.5; 1000#, 12k chosera, 0.5 stops
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Geocyclist
Rating:
10		 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 558 DLC M4 - Ritter Mini Griptilian 2.9 0.1 CPM M4 59-61 15 10k chosera, 0.5 strop Top A.75 EDC
 
Authors Comments:Had to go with top position to get clearance for 15 deg. A.75 got the bevel pretty even, just a little more on the belly and tip, but looks good. Stropped with both balsa and leather at 15 deg.
Angle/Finish Tried with Ratings
Setting 1:
15 deg, 10k Chosear, balsa and leather at 15 deg.
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Geocyclist
Rating:
10		 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 551 1303 3.4 .115 CPM M4 59-61 15 1k Chosera, 3.5 Strops Top A.75 EDC
 
Authors Comments:Needed top depth at 15 deg. Might try alignment "B" next time to get bevel more even (A.75 is a little bevel at tip)
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Geocyclist
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Mora Calssic 2 10.5cm 2mm Carbon 59-60 RC 17 15u top 55mm tip to CL/Vise Camp Utility Knife
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: guest
Rating:
7		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Spyderco Native 3 1/16" 1/8" S30V 59-60 HRC 18 deg. Micro Fine Fine Top A 3/4 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: cbwx34
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
CRKT Onion-Shenanigan #K470KKP 3.25 inch 0.119 inch / 3.0mm Acuto 59-60 HRC 20* 0.6 ceramic Upper holes B EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Mikedoh
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
SOG Visionary 1 3" .12" VG-10 59-60 23 to 25 1000 Top A .5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
SOG X Ray Vision Mini 3" .12" VG-10 59-60 23 to 25 1000 Top A .5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1

<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
Page 10 of 20