Glossary of Sharpening Terms
(Difference between revisions)
m (→Parts of a Knife) |
(→Types of Edges) |
||
| Line 28: | Line 28: | ||
[[image:ChiselGrind.gif]] | [[image:ChiselGrind.gif]] | ||
| + | |||
| + | |||
| + | Double Bevel: | ||
| + | |||
| + | [[image:DoubleBevel.png]] | ||
Revision as of 15:04, 20 January 2013
Terms Used in Sharpening
Burr: In engineering, a burr refers to the raised edge on a metal part. It may be present in the form of a fine wire on the edge of a freshly sharpened tool or as a raised portion on a surface, after being struck a blow from an equally hard, or heavy object.' A burr, also called a wire edge, is created as a result of sharpening metal. The burr forms on the edge of the knife where the planes of the bevels (or, in the case of one-sided knives or chisels, the plane of one face and the bevel) intersect. The diagram below shows the burr projecting from the edge of the knife:
Parts of a Knife
Tip
Heel
Choil
Ricasso
Types of Edges
Straight or Flat Grind:
Convex Grind:
Chisel Grind:
Double Bevel:
