product manuals & instructions

How to Install DualCam© Vise Jaws for 1/4" Blades

How to Install DualCam© Vise Jaws for 1/4" Blades

Looking to sharpen thicker blades on your Wicked Edge sharpener? The DualCam© Vise Jaws for 1/4" blades are designed to give you a secure and repeatable clamp for even the bulkiest knife spines. This quick guide walks you through removing your current jaws and installing the 1/4" upgrade jaws on your Wicked Edge DualCam Vise.

Tools You’ll Need

  • Your Wicked Edge depth key
  • Your DualCam Vise in the upright, unlocked position

Step-by-Step Installation Instructions

Removing the Current Jaws

  1. Raise the vise lever to the upright position to unlock the jaws.
  2. Lightly pinch the installed jaws together with your thumb and forefinger.
  3. Using a single prong of the depth key, push the locking pins forward through the front of the vise.
  4. Pull the pins out one at a time and carefully remove the jaws. Be mindful of the internal spring so it doesn’t get lost.

Installing the 1/4" Jaws

  1. Ensure the vise lever is still in the upright, unlocked position.
  2. Slide the new 1/4" jaws into the empty slots on either side of the vise.
  3. Reinsert the pins through the front (or back) of the vise to secure the jaws in place.
  4. It may take a few adjustments to align everything—once the pins are lined up properly, they should slide in smoothly.

That’s it! Your 1/4" DualCam Jaws are now installed and ready to secure thicker blades with ease.

Video Tutorial

For a full visual walkthrough, watch our installation video here: How to Install 1/4" DualCam© Jaws

Learn more about Wicked Edge precision knife sharpeners here.

Reading next